Brocade 57-1000485-01 32G Fibre Channel SFP+ Transceiver

Brocade 57-1000485-01 32G Fibre Channel SFP+ Transceiver

The Brocade 57-1000485-01 32G Fibre Channel SFP+ Transceiver is a high-speed 32 Gbps Fibre Channel optical transceiver designed for modern SAN (Storage Area Network) and data center environments. It operates over 850 nm wavelength and supports short-reach connectivity over multimode fiber, making it perfect for server-to-switch or switch-to-switch links within racks or across nearby rooms.

Key Features

• 32 Gbps Fibre Channel Speed – High-bandwidth performance for enterprise SANs.
• 850 nm Wavelength (SWL) – Optimized for short-reach multimode fiber (MMF).
• SFP+ Form Factor – Hot-pluggable and compact design.
• Dual LC Connector – Standard duplex optical interface.
• Supports Up to ~100–300 m on MMF (reach depends on fiber type and quality).
• Enterprise-Grade Reliability – Built for data centers and storage fabrics.
• Low Latency & High Signal Integrity – Ideal for mission-critical applications.

 How to Install Brocade 32G Fibre Channel SFP+ Transceiver

Installing the Brocade 57-1000485-01 transceiver is simple:

1. Power off the device (optional but safe)
2. Locate an empty SFP+ port on your switch or SAN device
3. Remove dust caps from both the transceiver and fiber cable ends
4. Insert the transceiver into the SFP+ slot until it clicks
5. Connect the LC multimode fiber cable
6. Power on the device (if powered off)
7. Check link status via CLI or switch management interface

This module is hot-pluggable, so you can insert/remove it while the device is running (in most supported systems).

Compatibility

This transceiver works with:

• Brocade Fibre Channel switches and directors
• Enterprise SAN storage systems
• Servers or HBAs that support 32G FC optics
• Multimode fiber (OM3/OM4) infrastructure
• Devices that accept standard SFP+ Fibre Channel optics

 Always verify your switch/host supports 32 Gbps Fibre Channel modules and the specific wavelength/reach.

Best Applications

• Storage Area Networks (SAN)
• Data center server-to-switch links
• Switch-to-switch optical uplinks
• High-speed backup and replication
• Virtualized storage environments

Where to Buy in Brocade 57-1000485-01 32G Fibre Channel SFP+ Transceiver Bangladesh

You can purchase the Brocade 57-1000485-01 32G FC SFP+ Transceiver from reputable networking hardware suppliers in Bangladesh from Datacom Technologies BD

FAQ (Frequently Asked Questions)

1. What is Brocade 57-1000485-01 used for?

• It’s used to connect servers and storage switches in high-speed SAN networks with up to 32 Gbps Fibre Channel.

2. What fiber type does it use?

• It uses multimode fiber (MMF) with an 850 nm wavelength for short-reach links.

3. Is it hot-pluggable?

• Yes, this SFP+ transceiver can be inserted or removed while the device is running.

4. What is the typical reach?

• Reach is generally up to ~100–300 m depending on fiber type (OM3/OM4).

5. Can it work with non-Brocade switches?

• It may work with other switches that support standard 32G FC SFP+ optics, but compatibility depends on vendor policies.

Conclusion (CTA)

For enterprise-grade, high-speed Fibre Channel connectivity, the Brocade 57-1000485-01 32G FC SFP+ Module is a reliable choice. Its robust performance and short-reach optical design make it perfect for SAN and data center environments.

 Order now from Datacom Technologies BD and boost your SAN infrastructure with genuine Brocade optics!