Brocade 4G Fibre Channel SFP Transceiver

Brocade 4G Fibre Channel SFP Transceiver

The Brocade 4G Fibre Channel SFP Transceiver is a 4 Gbps Fibre Channel optical transceiver designed for enterprise storage networking and SAN (Storage Area Network) environments. It supports 4GBase-SW and Tri-Rate 1G/2G/4G Fibre Channel communication, enabling reliable, low-latency connectivity between switches, servers, and storage devices using optical fiber.

Key Features

• Up to 4 Gbps Fibre Channel Speed – Supports 1G/2G/4G Fibre Channel protocols for flexible SAN use.
• Short-Wavelength (850 nm) or Long-Wavelength (1310 nm) Options – Short reach over multimode fiber or extended reach over single-mode fiber.
• Hot-Pluggable SFP Form Factor – Easy to install without powering down.
• Duplex LC Connector – Standard fiber optic interface.
• Tri-Rate Support – Backward compatibility with lower speeds (1G/2G).
• Digital Diagnostic Monitoring (DDM) – Real-time monitoring of optical performance (on many variants).

How to Install

1. Power off the switch (optional but safe)
2. Locate an empty SFP port on your Brocade switch or compatible SAN device
3. Remove dust caps from both the transceiver and fiber cable ends
4. Insert the SFP transceiver gently into the port until it clicks
5. Connect the LC fiber cable
6. Power on the device (if powered off)
7. Verify link status via CLI or switch management interface

This transceiver is hot-pluggable, meaning it can be installed or removed while the device is running (if supported by the switch).

Compatibility

This Brocade 4G FC SFP Transceiver is compatible with:

• Brocade Fibre Channel switches and directors
• Enterprise SAN storage systems
• Servers or host bus adapters (HBAs) supporting 4G FC optics
• Multimode fiber (OM2/OM3/OM4) for short-reach models
• Single-mode fiber (SMF) for long-reach models (e.g., 4 km or 10 km)

Always verify that your specific switch supports 4G FC optics and the desired reach type before purchasing.

Best Applications

• Storage Area Networks (SAN)
• Data center server-to-switch optical links
• Switch-to-switch interconnects
• Enterprise backup and replication systems
• Virtualized storage environments

Where to Buy Brocade 4G Fibre Channel SFP Transceiver in Bangladesh

You can purchase the Brocade 4G Fibre Channel SFP Transceiver from reputable IT and networking hardware suppliers in Bangladesh.

Buy from Datacom Technologies BD — genuine optics with competitive price in BD, fast delivery across Bangladesh, and professional support.

FAQ (Frequently Asked Questions)

1. What is a 4G Fibre Channel SFP transceiver?

• It’s a 4 Gbps Fibre Channel optical module used to connect storage devices and switches in SAN networks.

2. What fiber types are supported?

• Short-reach models use multimode fiber (850 nm), and long-reach models use single-mode fiber (1310 nm).

3. Is this module hot-pluggable?

• Yes — it supports hot-swappable installation.

4. What is the typical reach?

• Short-reach models can span ~150–550 m on multimode fiber, while long-reach models can reach several kilometers depending on fiber type.

5. Will it work with non-Brocade switches?

• It may work with other switches that support standard 4G FC SFP optics, but compatibility depends on vendor policies.

Conclusion (CTA)

If you need reliable 4 Gbps Fibre Channel connectivity for your SAN or data center infrastructure, the Brocade 4G Fibre Channel SFP Module is a solid choice. Its broad compatibility, flexible reach options, and hot-pluggable design make it ideal for enterprise storage networking.

Order now from Datacom Technologies BD and upgrade your SAN with genuine Brocade optics!