Extreme Networks® 10309-DW5575-AO Compatible TAA 10GBase-DWDM SFP+ Transceiver C-Band 100GHz (SMF, 1555.75nm, 40km, LC, DOM)

About Extreme Networks 10309-DW5575-AO Compatible TAA 10GBase-DWDM SFP+ Transceiver in Bangladesh

The Extreme Networks® 10309-DW5575-AO is a compatible TAA-compliant 10GBase-DWDM SFP+ transceiver designed for long-distance optical networking over single-mode fiber. It supports a 10Gbps data rate and provides up to 40km transmission using a 1555.75nm wavelength, C-Band 100GHz channel spacing and an LC connector.

This compatible transceiver is designed for use with equipment requiring the Extreme Networks 10309-DW5575 optical specification. It supports Digital Optical Monitoring (DOM), allowing network administrators to monitor supported optical operating parameters in real time. The referenced manufacturer confirms that the module is programmed, serialized and tested for compatibility with Extreme Networks equipment. :contentReference[oaicite:2]{index=2}

Extreme Networks 10309-DW5575-AO 10G DWDM SFP+ Specifications & Features

Overview

The Extreme Networks 10309-DW5575-AO is a 10Gbps DWDM SFP+ optical transceiver intended for long-distance fiber-optic networking. It operates at 1555.75nm and supports a transmission distance of up to 40km over single-mode fiber.

The module uses C-Band Dense Wavelength Division Multiplexing technology with 100GHz channel spacing. Its ITU channel is 27, making it suitable for deployments where specific DWDM wavelengths and channel plans are required. :contentReference[oaicite:3]{index=3}

Buy Extreme Networks 10309-DW5575-AO Compatible SFP+ in Bangladesh

Purchase the Extreme Networks 10309-DW5575-AO compatible TAA 10GBase-DWDM SFP+ transceiver from Datacom Technologies (BD). We supply Extreme Networks-compatible optical transceivers, SFP/SFP+/SFP28 modules, QSFP/QSFP28 optics and enterprise networking components in Bangladesh with competitive pricing, technical consultation and nationwide delivery.

Key Features

• 10Gbps 10GBase-DWDM optical connectivity
• SFP+ form factor
• 1555.75nm operating wavelength
• 40km transmission reach
• C-Band DWDM operation
• 100GHz ITU channel spacing
• ITU Channel 27
• Single-Mode Fiber (SMF) support
• LC optical connector
• Digital Optical Monitoring (DOM)
• 0°C to 70°C operating temperature
• TAA compliant
• Compatible with Extreme Networks 10309-DW5575 specification

Applications

• Extreme Networks Switches
• 10GbE Enterprise Networks
• DWDM Network Infrastructure
• Long-Distance Fiber Links
• Data Center Interconnects
• Campus Network Backbones
• Metro Ethernet Networks
• Service Provider Networks
• Enterprise WAN Connectivity
• Optical Transport Networks

10Gbps DWDM Connectivity

The 10309-DW5575-AO provides 10Gbps Ethernet connectivity in an SFP+ form factor. Its DWDM optical architecture enables the 10Gbps signal to operate on a specific wavelength within the C-Band optical spectrum.

DWDM allows multiple optical channels to share the same fiber infrastructure, making it particularly useful for organizations looking to increase network capacity without installing additional fiber pairs.

1555.75nm Wavelength

This transceiver operates at 1555.75nm, corresponding to ITU Channel 27 in the documented 100GHz DWDM channel plan. :contentReference[oaicite:4]{index=4}

When deploying DWDM optics, the wavelength and ITU channel must be matched with the corresponding optical equipment, mux/demux components and remote transceiver. A different DWDM wavelength should not be substituted without confirming system compatibility.

C-Band 100GHz DWDM

The module operates in the C-Band with 100GHz channel spacing. This allows it to participate in a structured DWDM wavelength plan alongside other compatible C-Band optical channels.

For multi-channel DWDM deployments, the selected transceivers, optical multiplexer/demultiplexer and network equipment should use a compatible channel spacing and wavelength plan.

40km Transmission Reach

The 10309-DW5575-AO is specified for a maximum reach of 40km over single-mode fiber. :contentReference[oaicite:5]{index=5}

Actual achievable distance depends on fiber characteristics, optical loss, connector and splice losses, patch panels, optical budget, environmental conditions and the equipment at the opposite end of the link.

Single-Mode Fiber

The transceiver is designed for Single-Mode Fiber (SMF). SMF is used for long-distance optical transmission because it provides significantly greater reach than conventional multimode fiber.

Use appropriate single-mode fiber patch cords and compatible LC optical connections when deploying this module.

LC Connector

The 10309-DW5575-AO uses an LC optical connector. LC connectors are widely used with SFP and SFP+ optical transceivers and provide a compact duplex fiber interface.

Ensure that the fiber patch cable and optical distribution equipment use compatible LC interfaces.

Digital Optical Monitoring (DOM)

The transceiver supports Digital Optical Monitoring (DOM). DOM allows supported network equipment to report optical and operational parameters from the transceiver.

Depending on the host switch or router, available monitoring information can include parameters such as optical transmit and receive levels, temperature and supply voltage.

TAA Compliance

The 10309-DW5575-AO is specified as Trade Agreements Act (TAA) compliant. TAA compliance can be an important procurement requirement for organizations subject to applicable U.S. government sourcing rules. :contentReference[oaicite:6]{index=6}

Temperature Range

The documented operating temperature range is 0°C to 70°C, making the module suitable for standard commercial-temperature networking environments. :contentReference[oaicite:7]{index=7}

For installations in outdoor cabinets, industrial environments or locations exposed to extreme temperatures, verify the environmental requirements of the complete networking system.

Extreme Networks Compatibility

The transceiver is specifically designed as a compatible replacement for the Extreme Networks 10309-DW5575 optical specification. The referenced manufacturer states that the module is programmed and tested for compatibility with Extreme Networks equipment. :contentReference[oaicite:8]{index=8}

Compatibility should still be checked against the exact switch or router model, firmware version and optical-port requirements before deployment.

DWDM Network Architecture

DWDM enables multiple wavelengths to travel over the same single-mode fiber infrastructure. Each optical channel operates at a specific wavelength, allowing multiple independent data streams to share the fiber.

The 10309-DW5575-AO uses 1555.75nm / ITU Channel 27. In a multi-channel system, this channel must be paired with compatible DWDM equipment using the corresponding wavelength.

Data Center Interconnect

With a specified 40km reach, the transceiver can be used for suitable long-distance 10GbE connections between network locations. Potential applications include data center interconnects, campus backbone links and metropolitan network connections.

Before deployment, calculate the complete optical link budget and confirm that the expected fiber loss remains within the transceiver's supported optical budget.

Long-Distance Enterprise Networking

The 10309-DW5575-AO is particularly useful where standard short-range SFP+ optics are insufficient and a DWDM-based long-distance architecture is required.

• Inter-building connectivity
• Campus backbone links
• Data center interconnects
• Metro network connections
• Enterprise WAN links
• Service-provider infrastructure

10309-DW5575-AO vs Standard 10G SR SFP+

Installation Considerations

• Verify the host device supports the 10309-DW5575 optical specification.
• Use compatible single-mode fiber.
• Use LC-compatible fiber connectors.
• Confirm the remote transceiver uses the appropriate DWDM wavelength.
• Verify the DWDM channel plan and 100GHz spacing.
• Check the total optical link budget before installation.
• Ensure the operating environment remains within 0°C to 70°C.
• Keep optical connectors clean to minimize insertion loss.

Benefits

• 10Gbps DWDM connectivity
• 40km long-distance reach
• 1555.75nm C-Band wavelength
• 100GHz DWDM channel spacing
• ITU Channel 27
• Single-mode fiber support
• LC connector
• DOM monitoring capability
• TAA compliant
• Extreme Networks 10309-DW5575 compatibility
• Suitable for enterprise and data center optical networks

Why Buy from Datacom Technologies (BD)?

Datacom Technologies (BD) supplies Extreme Networks-compatible SFP, SFP+, SFP28, QSFP+ and QSFP28 optical transceivers in Bangladesh. Customers can receive competitive pricing, compatibility guidance, technical consultation and nationwide delivery.

• Call/WhatsApp: +8801748173213
• Email: sales@datacom.com.bd
• Alternative Email: datacomtechnologiesbd@gmail.com
• Office: Tropical Center, 218, Dr. Kudroti Khuda Road, New Elephant Road, Dhaka-1205, Bangladesh

Frequently Asked Questions (FAQ)

Q1: What is Extreme Networks 10309-DW5575-AO?
It is a TAA-compliant compatible 10GBase-DWDM SFP+ transceiver for the Extreme Networks 10309-DW5575 specification.

Q2: What speed does this transceiver support?
It supports 10Gbps 10GBase connectivity.

Q3: What wavelength does 10309-DW5575-AO use?
It operates at 1555.75nm.

Q4: What is the maximum transmission distance?
The specified reach is up to 40km over single-mode fiber.

Q5: What type of fiber does it use?
It is designed for Single-Mode Fiber (SMF).

Q6: What connector does it use?
The transceiver uses an LC connector.

Q7: What is the ITU channel?
The documented ITU channel is 27.

Q8: What is the DWDM channel spacing?
It uses 100GHz channel spacing in the C-Band.

Q9: Does the module support DOM?
Yes. Digital Optical Monitoring (DOM) is supported.

Q10: Is this transceiver TAA compliant?
Yes. The referenced product specification identifies it as TAA compliant.

Q11: What is the operating temperature?
The specified operating temperature range is 0°C to 70°C.

Q12: Is this a standard 10G SR SFP+?
No. It is a 10GBase-DWDM SFP+ designed for long-distance single-mode fiber transmission using a specific C-Band wavelength.

Q13: Can different DWDM wavelengths be mixed?
DWDM wavelengths must match the optical channel plan and corresponding equipment. The 10309-DW5575-AO specifically uses 1555.75nm / ITU Channel 27.

Q14: Where can I buy 10309-DW5575-AO in Bangladesh?
You can contact Datacom Technologies (BD) for Extreme Networks-compatible optical transceivers and enterprise networking equipment with competitive pricing and nationwide delivery.