6Com QSFP-100G-SR4-S QSFP28 Optical Transceiver Module

About 6Com QSFP-100G-SR4-S QSFP28 Optical Transceiver Module in Bangladesh

The 6Com QSFP-100G-SR4-S is a 100Gbps QSFP28 optical transceiver designed for short-range, high-bandwidth fiber-optic networking applications. Based on the 100GBASE-SR4 standard, this optical module uses 850nm VCSEL technology and four parallel optical channels to deliver 100Gbps-class connectivity over multimode fiber.

The 6Com QSFP-100G-SR4-S is designed for high-density data center networking, rack-to-rack connectivity, enterprise core networks, and data center interconnect applications. It supports transmission distances of up to 100 meters over OM4 multimode fiber and up to 70 meters over OM3 multimode fiber, making it suitable for short-reach high-speed optical links.

Featuring a QSFP28 form factor, the transceiver provides a compact and hot-pluggable optical interface for compatible 100G switches, routers, network adapters, and other networking equipment. The module uses an MTP/MPO-12 male optical connector and supports Digital Diagnostic Monitoring (DDM) for real-time monitoring of key operating parameters.

The 6Com QSFP-100G-SR4-S is compliant with QSFP28 MSA and IEEE 802.3bm 100GBASE-SR4 specifications. It can also support compatible networking protocols and platforms where the appropriate transceiver coding and optical specifications are supported.

6Com QSFP-100G-SR4-S QSFP28 Optical Transceiver Module Specifications & Features

Overview

The 6Com QSFP-100G-SR4-S QSFP28 Optical Transceiver Module provides high-speed 100Gbps optical connectivity for short-distance multimode fiber applications. Its 100GBASE-SR4 architecture uses four independent optical lanes, each operating at approximately 25Gbps, to provide an aggregate 100Gbps connection.

The 850nm VCSEL transmitter and PIN receiver are optimized for multimode fiber deployments. With OM4 fiber, the module can support links up to 100 meters, while OM3 fiber supports distances up to 70 meters, subject to the complete optical link budget and installation conditions.

The module's QSFP28 form factor enables high-density 100G connectivity in compatible networking equipment. Its hot-pluggable design allows supported network devices to install or replace the optical module while the host system remains powered.

Buy 6Com QSFP-100G-SR4-S QSFP28 Optical Transceiver Module in Bangladesh

Purchase the 6Com QSFP-100G-SR4-S 100GBASE-SR4 QSFP28 Optical Transceiver Module from Datacom Technologies (BD). We supply 6Com optical transceivers, QSFP28 modules, SFP/SFP28 optics, fiber-optic networking products, enterprise switches, data center equipment, and high-speed optical connectivity solutions with competitive pricing, technical consultation, deployment assistance, and nationwide delivery throughout Bangladesh.

Key Features

• 100Gbps high-speed optical connectivity
• QSFP28 compact pluggable form factor
• 100GBASE-SR4 optical standard
• 850nm VCSEL transmitter
• Four independent optical channels
• Up to 100m transmission over OM4 MMF
• Up to 70m transmission over OM3 MMF
• MTP/MPO-12 male optical connector
• Digital Diagnostic Monitoring (DDM) support
• Hot-pluggable design
• Low power consumption of up to 1.8W
• Operating temperature range of 0°C to 70°C
• Suitable for high-density 100G data center networking

Applications

• 100G Data Center Networking
• Rack-to-Rack Connectivity
• Data Center Interconnect
• Enterprise Core Networks
• Campus Network Infrastructure
• High-Speed Switch-to-Switch Links
• Server-to-Switch Connectivity
• 100G Ethernet Backbone Links
• Multimode Fiber Infrastructure
• High-Bandwidth Network Upgrades

100GBASE-SR4 Optical Connectivity

100GBASE-SR4 is designed for short-range 100Gbps Ethernet connectivity using parallel multimode fiber. The 6Com QSFP-100G-SR4-S uses four optical transmit and receive lanes, with each lane operating at approximately 25Gbps to provide an aggregate 100Gbps link.

This architecture makes the module particularly suitable for data center environments where network devices are located within the supported multimode fiber distance. OM4 fiber can support up to 100 meters, while OM3 fiber can support up to 70 meters according to the module's published specifications.

QSFP28 Form Factor

The QSFP28 form factor provides a compact, high-density interface for 100Gbps networking. It enables compatible switches, routers, network adapters, and other networking equipment to provide high-speed optical connectivity while maintaining modularity and serviceability.

The hot-pluggable design allows the module to be inserted or removed from supported equipment while the host device is powered, making it convenient for network expansion, maintenance, and optical module replacement.

MTP/MPO Fiber Connectivity

The 6Com QSFP-100G-SR4-S uses an MTP/MPO-12 male optical connector for its parallel multimode fiber interface. Proper fiber type, connector polarity, lane mapping, and cabling must be used to establish a reliable 100GBASE-SR4 link.

For installations using MPO/MTP patch panels, cassettes, or breakout assemblies, the complete optical path should be checked for connector compatibility, polarity, insertion loss, and supported transmission distance.

Compatibility

• Cisco-compatible 100G QSFP28 platforms
• Huawei-compatible 100G QSFP28 platforms
• Juniper-compatible 100G QSFP28 platforms
• Arista-compatible 100G QSFP28 platforms
• Mellanox-compatible 100G QSFP28 platforms
• Dell-compatible 100G QSFP28 platforms
• Brocade-compatible 100G QSFP28 platforms
• Extreme Networks-compatible 100G platforms
• H3C-compatible 100G QSFP28 platforms
• MikroTik-compatible 100G QSFP28 platforms

Exact compatibility depends on the host device, firmware, transceiver coding, supported optics list, and platform requirements. Always verify compatibility with the specific switch, router, NIC, or other host equipment before deployment.

Benefits

• 100Gbps high-bandwidth network connectivity
• Short-reach optical connectivity for data centers
• Supports OM4 and OM3 multimode fiber
• Compact QSFP28 form factor
• Hot-pluggable module design
• DDM for optical monitoring
• Low power consumption
• Suitable for high-density network deployments
• Ideal for rack-to-rack and switch-to-switch connectivity
• Suitable for enterprise core and data center networks

Why Buy from Datacom Technologies (BD)?

Datacom Technologies (BD) supplies networking and data center infrastructure products in Bangladesh, including 6Com optical transceivers, QSFP28 modules, SFP/SFP28 optics, fiber-optic equipment, enterprise switches, server networking components, and high-speed data center connectivity solutions. Customers can receive competitive pricing, technical consultation, deployment assistance, and after-sales support.

• Call/WhatsApp: +8801748173213
• Email: sales@datacom.com.bd
• Alternative Email: datacomtechnologiesbd@gmail.com
• Office: Tropical Center, 218, Dr. Kudroti Khuda Road, New Elephant Road, Dhaka-1205, Bangladesh

Frequently Asked Questions (FAQ)

Q1: What is the data rate of the 6Com QSFP-100G-SR4-S?
The module provides 100Gbps-class optical connectivity.

Q2: What form factor does the 6Com QSFP-100G-SR4-S use?
It uses the QSFP28 pluggable form factor.

Q3: What is the wavelength of the 6Com QSFP-100G-SR4-S?
The optical wavelength is 850nm and uses VCSEL-based transmission.

Q4: What fiber does the 6Com QSFP-100G-SR4-S use?
It is designed for OM3 and OM4 multimode fiber.

Q5: What is the maximum transmission distance?
The published specification supports up to 100 meters over OM4 multimode fiber and up to 70 meters over OM3 multimode fiber.

Q6: What connector does this 100G SR4 transceiver use?
It uses an MTP/MPO-12 male optical connector.

Q7: Does the 6Com QSFP-100G-SR4-S support DDM?
Yes. The module supports Digital Diagnostic Monitoring for real-time monitoring of supported operating parameters.

Q8: Is the 6Com QSFP-100G-SR4-S hot-pluggable?
Yes. The QSFP28 transceiver is designed as a hot-pluggable optical module for compatible host equipment.

Q9: Is this transceiver suitable for data centers?
Yes. 100GBASE-SR4 is well suited to short-reach, high-density data center applications such as rack-to-rack and switch-to-switch connectivity.

Q10: Can this module be used with OM3 fiber?
Yes. The published 6Com specification supports up to 70 meters over OM3 multimode fiber.

Q11: Can this module be used with OM4 fiber?
Yes. The published specification supports up to 100 meters over OM4 multimode fiber.

Q12: Where can I buy the 6Com QSFP-100G-SR4-S in Bangladesh?
You can contact Datacom Technologies (BD) for 6Com 100G QSFP28 optical transceivers, fiber-optic networking products, data center equipment, and high-speed network connectivity solutions with competitive pricing and nationwide delivery.