Alcatel-Lucent QSFP-40G-SR Compatible TAA 40Gbps QSFP+ Transceiver Module
The Alcatel-Lucent QSFP-40G-SR Compatible transceiver is a 40Gbps optical module designed for 40GBASE-SR4 Ethernet connectivity over multimode fiber. It provides short-range, high-bandwidth connectivity for compatible Alcatel-Lucent networking equipment and is suitable for data center and enterprise network environments.
The module uses the QSFP+ form factor, operates at 850nm, and uses an MPO/MTP optical interface. It supports link distances of up to 100 meters over OM3 and 150 meters over OM4 multimode fiber.
40GBASE-SR4 High-Speed Connectivity
This transceiver is designed for 40 Gigabit Ethernet applications using the 40GBASE-SR4 standard. Its four-channel parallel optical architecture provides an aggregate 40Gbps data connection for compatible switches, routers, servers, and other network equipment.
The module follows applicable IEEE 802.3ba and QSFP+ MSA specifications, making it suitable for high-density 40Gbps network deployments.
850nm Multimode Fiber Transmission
The transceiver operates at a nominal 850nm wavelength and uses multimode fiber. It supports approximately 100m on OM3 MMF and 150m on OM4 MMF, depending on the deployed fiber infrastructure and link conditions.
Parallel Four-Channel Architecture
The 40GBASE-SR4 architecture uses four optical transmit and receive channels, each carrying approximately 10Gbps. This parallel design enables high-bandwidth 40Gbps transmission through the MPO/MTP fiber interface.
QSFP+ and MPO/MTP Interface
The compact QSFP+ form factor provides a hot-pluggable interface for compatible 40Gbps networking equipment. The optical interface uses an MPO/MTP-12 connector for parallel multimode fiber connectivity.
Digital Optical Monitoring
Compatible versions of this QSFP-40G-SR module support Digital Optical Monitoring (DOM), allowing supported host equipment to monitor optical operating parameters such as temperature, voltage, and optical power.
Technical Specifications
| Specification |
Details |
| Brand |
Alcatel-Lucent Compatible |
| Model |
QSFP-40G-SR |
| Product Type |
40GBASE-SR4 Optical Transceiver |
| Form Factor |
QSFP+ |
| Data Rate |
40Gbps |
| Optical Standard |
40GBASE-SR4 |
| Wavelength |
850nm |
| Fiber Type |
Multimode Fiber (MMF) |
| Transmission Distance |
100m OM3 / 150m OM4 |
| Connector |
MPO/MTP-12 |
| Optical Architecture |
4 × 10Gbps Parallel Optics |
| Transmitter |
VCSEL |
| Receiver |
PIN |
| Digital Optical Monitoring |
Supported |
| Maximum Power Consumption |
1.5W |
| Operating Temperature |
0°C to 70°C |
| Compliance |
TAA Compliant |
Applications
- 40GBASE-SR4 Ethernet networks
- Data center switch-to-switch connectivity
- Server-to-switch connections
- Enterprise core and aggregation networks
- High-density network infrastructure
- OM3 and OM4 multimode fiber links
Compatibility
The Alcatel-Lucent QSFP-40G-SR Compatible module is designed for compatible Alcatel-Lucent networking equipment supporting 40GBASE-SR4 QSFP+ optics. The compatible module is programmed and tested for the corresponding OEM platform.
Before installation, verify the host device's supported transceiver list, QSFP+ port requirements, MPO/MTP fiber configuration, and required transmission distance. The deployed fiber should also meet the appropriate OM3 or OM4 specifications.
Buy Alcatel-Lucent QSFP-40G-SR Compatible Transceiver in Bangladesh
Datacom Technologies (BD) supplies Alcatel-Lucent-compatible optical transceivers, enterprise networking equipment, fiber connectivity products, and data center hardware in Bangladesh. This QSFP-40G-SR compatible 40GBASE-SR4 module is suitable for compatible 40Gbps network environments requiring short-range multimode fiber connectivity.
For enterprise, ISP, telecom, data center, and project requirements, customers can request a quotation based on the required optical module, host equipment, fiber type, connector, and transmission distance.
-750x250.png "Datacom Technologies (BD)"){kind=logo}
