Cisco ONS-CXP2-MPO-5 5m Multimode MPO-to-MPO Patchcord for CXP2 Modules

The Cisco ONS-CXP2-MPO-5= is a 5-meter multimode fiber MPO-to-MPO patchcord designed for use with Cisco CXP2 optical modules and compatible high-density optical networking equipment. It provides a direct multi-fiber connection between CXP2 interfaces using MPO connectors.

Despite sometimes being listed as an “ONS transceiver module,” the ONS-CXP2-MPO-5= is a fiber patchcord, not an active optical transceiver. Cisco identifies the CXP2 transceiver separately as the ONS-CXP2-SR25, while CXP2-compatible MPO/MTP cabling is used to connect the optical interface.

Cisco ONS-CXP2-MPO-5 Key Features

• 5-meter multimode fiber patchcord
• MPO-to-MPO optical connector configuration
• Designed for Cisco CXP2 optical modules
• High-density parallel-fiber connectivity
• Suitable for short-distance optical interconnects
• Designed for Cisco ONS optical networking environments
• Supports high-bandwidth CXP2 optical connections

Cisco ONS-CXP2-MPO-5 Technical Specifications

MPO-to-MPO CXP2 Connectivity

The ONS-CXP2-MPO-5 provides a direct MPO-to-MPO fiber connection for compatible CXP2 optical interfaces. The MPO connector supports multiple optical fibers within a single high-density connector, making it appropriate for parallel optical applications.

5-Meter Multimode Fiber Cable

With a 5-meter cable length, the ONS-CXP2-MPO-5 is intended for short-distance equipment interconnection, including rack-level and data-center optical deployments where CXP2 modules are used.

Cisco CXP2 Compatibility

Cisco's ONS optical documentation identifies CXP2 as a high-density pluggable architecture. Cisco lists the ONS-CXP2-SR25 as a CXP2 transceiver with a 24-fiber MPO/MTP optical connector. The corresponding cabling is used to connect CXP2 optical interfaces.

Passive Optical Cable – Not a Transceiver

The ONS-CXP2-MPO-5= contains no optical transmitter, receiver or active electronics. It does not convert electrical signals into optical signals. Its function is simply to provide the physical multimode fiber connection between compatible optical interfaces.

Applications

• Cisco CXP2 optical module connections
• Data center optical interconnects
• High-density fiber patching
• Rack-to-rack multimode fiber connectivity
• Cisco ONS optical transport environments
• Short-distance high-bandwidth optical connections

Compatibility

The Cisco ONS-CXP2-MPO-5 should be used with optical equipment supporting the appropriate MPO interface and multimode fiber requirements. Verify connector gender, keying, polarity and fiber grade before installation.

It should not be confused with the ONS-CXP2-SR25, which is Cisco's actual CXP2 transceiver module. The ONS-CXP2-MPO-5 is the physical fiber interconnect used with compatible CXP2 equipment.

Cisco ONS-CXP2-MPO-5 Price in Bangladesh

The price of the Cisco ONS-CXP2-MPO-5 in Bangladesh depends on product condition, sourcing, availability and warranty/support requirements. Contact Datacom Technologies (BD) for the latest price and availability.

Sales: sales@datacom.com.bd

Why Choose Cisco ONS-CXP2-MPO-5?

• Designed specifically for CXP2 optical connectivity
• 5-meter cable length for short-distance installations
• MPO-to-MPO high-density fiber connection
• Multimode fiber construction
• Passive design with no power requirement
• Suitable for data center and optical transport environments
• Helps simplify high-density parallel-fiber cabling

Buy Cisco ONS-CXP2-MPO-5 in Bangladesh

Looking for a Cisco ONS-CXP2-MPO-5 5-meter MPO-to-MPO multimode patchcord in Bangladesh? Contact Datacom Technologies (BD) for pricing, availability and CXP2 compatibility guidance.

Email: sales@datacom.com.bd