Extreme Networks – X440-G2-24p-10GE4

Extreme Networks X440-G2-24p-10GE4 24-Port Gigabit PoE+ Managed Switch

The Extreme Networks X440-G2-24p-10GE4 is a stackable enterprise access switch designed for campus and business network deployments. It combines 24 Gigabit Ethernet PoE+ ports with dedicated SFP/SFP+ uplink connectivity and ExtremeXOS network operating system features for Layer 2 switching, Layer 3 IPv4/IPv6 routing, network security, traffic management and high-speed stacking.

The switch provides 24 front-panel 10/100/1000BASE-T PoE+ ports, four front-panel 1GBASE-X SFP combination ports and four rear-panel 1GBASE-X SFP+ ports. The four rear SFP+ ports can operate at 10GbE after applying the required software license. By default, these ports operate at 1Gbps. This licensing requirement should be considered when planning a 10GbE uplink deployment.

Extreme Networks X440-G2-24p-10GE4 Features

• 24 × 10/100/1000BASE-T Gigabit Ethernet PoE+ ports
• IEEE 802.3af and IEEE 802.3at PoE support
• Up to 30W PoE power per supported port
• 4 × front-panel 1GBASE-X SFP combination ports
• 4 × rear-panel 1GBASE-X SFP+ ports
• Rear SFP+ ports support 1GbE by default and can be upgraded to 10GbE through licensing
• ExtremeXOS operating system
• Layer 2 switching and Layer 3 IPv4/IPv6 routing
• High-speed SummitStack-V stacking capability
• Up to eight compatible X440-G2 switches can be stacked
• Up to 40Gbps stacking bandwidth per unit
• Role-based network access policies
• Bi-directional Access Control Lists
• Ingress and egress bandwidth control
• IEEE 802.1 Audio Video Bridging support
• ExtremeCloud IQ and ExtremeCloud IQ Site Engine management support on supported configurations
• Front USB 2.0 port for supported ExtremeXOS versions
• Redundant power supply connection

Detailed Technical Specifications

Port and Uplink Configuration

The X440-G2-24p-10GE4 has 24 front-panel PoE+ Gigabit Ethernet ports. Ports 1 through 16 support both half-duplex and full-duplex communication, while ports 17 through 24 support full-duplex communication.

There are four front-panel 1GBASE-X SFP combination ports and four rear-panel 1GBASE-X SFP+ ports. The rear SFP+ ports can be used at 1GbE or upgraded to 10GbE. 10GbE operation requires the appropriate Extreme Networks software license.

Two of the rear ports can alternatively be configured for stacking functionality. The exact combination of stacking and 10GbE operation depends on the selected configuration and applicable licensing.

Compatibility

The X440-G2-24p-10GE4 is designed for compatible Gigabit Ethernet endpoints and standards-compliant PoE devices. The PoE ports support IEEE 802.3af/at devices, while SFP/SFP+ compatibility depends on the specific Extreme Networks-qualified or supported transceiver, fiber type, wavelength, distance and configuration.

For 10GbE uplinks, the four rear SFP+ ports require the applicable 10GbE upgrade license. The switch should therefore be evaluated based on both the hardware configuration and the software licensing status before purchasing or deploying it for 10GbE connectivity.

For replacement or expansion of an existing Extreme Networks environment, verify the ExtremeXOS version, hardware revision, installed licenses, transceiver requirements and stacking configuration. Extreme Networks specifies minimum ExtremeXOS requirements for certain X440-G2 hardware revisions.

Applications and Use Cases

• Enterprise campus access-layer networking
• Business and office Ethernet networks
• PoE IP phone deployments
• Wireless access point connectivity
• IP surveillance camera networks
• Enterprise network segmentation and access control
• Gigabit-to-10GbE uplink deployments
• Fiber-based network uplinks
• Stacked access-layer switching
• Existing Extreme Networks infrastructure replacement and expansion

Why Choose Extreme Networks X440-G2-24p-10GE4?

The X440-G2-24p-10GE4 provides a combination of 24-port Gigabit PoE+ access connectivity, flexible SFP connectivity and upgradeable 10GbE uplinks. ExtremeXOS provides enterprise switching, routing, security and management capabilities, while SummitStack-V enables high-speed stacking for supported deployments.

Its upgradeable SFP+ architecture can also allow a compatible deployment to move from 1GbE to 10GbE uplink speeds without replacing the switch, subject to the required Extreme Networks licensing and compatible optics.

Extreme Networks X440-G2-24p-10GE4 Price in Bangladesh

For the latest Extreme Networks X440-G2-24p-10GE4 price in Bangladesh, contact Datacom Technologies (BD). Pricing and availability may vary depending on sourcing, product condition, warranty and stock status.

Datacom Technologies (BD) supplies networking and IT infrastructure products for businesses, enterprises and organizations in Bangladesh. For quotation requests, exact model verification, licensing requirements, compatibility assistance and purchasing information, contact sales@datacom.com.bd.

Contact: sales@datacom.com.bd