ZTE 40G 850nm MM 300m QSFP+ SFP Module

About ZTE 40G 850nm MM 300m QSFP+ SFP Module in Bangladesh

The ZTE 40G 850nm MM 300m QSFP+ SFP Module is a high-speed 40Gbps optical transceiver designed for short-reach multimode fiber networking applications. The module uses 850nm VCSEL optical technology and a QSFP+ form factor to provide high-bandwidth connectivity for data centers, enterprise networks, telecom infrastructure, and high-performance computing environments.

The ZTE 033030600012 module is designed around the 40GBASE-SR4 optical architecture and provides an aggregate 40Gbps data rate through four parallel optical channels, each operating at approximately 10.3125Gbps. It supports transmission distances of up to 300 meters over OM3 multimode fiber and up to 400 meters over OM4 multimode fiber. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

Featuring a compact QSFP+ form factor, this module is suitable for high-density 40G network deployments where reliable short-distance optical connectivity is required. It uses an MTP/MPO parallel optical interface and is designed for compatible QSFP+ ports on switches, routers, servers, storage systems, and other networking platforms.

The module is also identified by the ZTE part number 033030600012 and MPN references TR-QQ85X-N00 and EOLQ-8540G-03-MO. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

ZTE 033030600012 40G QSFP+ 850nm Transceiver Specifications & Features

Overview

The ZTE 033030600012 QSFP+ optical transceiver provides 40Gbps Ethernet connectivity for short-reach multimode fiber applications. Its 850nm VCSEL array transmitter and PIN array receiver provide four parallel optical lanes for high-speed data transmission.

The module is designed for high-density networking environments where 40Gbps bandwidth is required over relatively short fiber distances. It can be used for switch-to-switch links, server-to-switch connectivity, storage networking, network aggregation, and other high-performance data center applications.

On OM3 multimode fiber, the module supports distances of up to 300 meters, while OM4 multimode fiber can extend the supported distance to up to 400 meters. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

Buy ZTE 40G 850nm MM 300m QSFP+ SFP Module in Bangladesh

Purchase the ZTE 033030600012 40G 850nm MM 300m QSFP+ SFP Module from Datacom Technologies (BD). We supply ZTE optical transceivers, QSFP+ modules, SFP/SFP+ optics, fiber-optic networking products, enterprise switches, data center equipment, telecom networking products, and high-speed optical connectivity solutions with competitive pricing, technical consultation, deployment assistance, and nationwide delivery throughout Bangladesh.

Key Features

• 40Gbps high-speed optical connectivity
• QSFP+ compact pluggable form factor
• 40GBASE-SR4 optical architecture
• 850nm VCSEL array transmitter
• PIN array receiver
• Four parallel 10.3125Gbps optical lanes
• Multimode fiber support
• Up to 300m over OM3 fiber
• Up to 400m over OM4 fiber
• MTP/MPO optical connector
• Single 3.3V power supply
• Less than 1.5W power consumption
• Digital diagnostic monitoring via I2C
• Operating temperature range of 0°C to +70°C
• IEEE 802.3ba and QSFP+ MSA SFF-8436 compliance

Applications

• 40G Data Center Networking
• Switch-to-Switch Connectivity
• Server-to-Switch Links
• Data Center Aggregation
• Enterprise Backbone Networks
• Storage Networking
• High-Performance Computing
• Telecom Switch and Router Connectivity
• Network Infrastructure Upgrades
• Short-Reach Multimode Fiber Links

40GBASE-SR4 Optical Technology

The ZTE 033030600012 uses the 40GBASE-SR4 architecture to provide 40Gbps Ethernet connectivity over parallel multimode fiber. Four optical channels operate at approximately 10.3125Gbps each to deliver the aggregate 40Gbps bandwidth.

The 850nm VCSEL-based design is optimized for short-reach multimode fiber applications commonly found inside data centers and enterprise facilities. The architecture provides a practical way to upgrade network links from lower-speed Ethernet to 40Gbps while maintaining a compact QSFP+ form factor.

850nm Multimode Fiber Connectivity

The module is designed for multimode fiber infrastructure and operates at a nominal wavelength of 850nm. It supports up to 300 meters on OM3 fiber and up to 400 meters on OM4 fiber under the specified optical conditions. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

For reliable operation, the complete optical channel should be checked for fiber grade, connector quality, insertion loss, polarity, lane mapping, and total optical budget before deployment.

MTP/MPO Optical Interface

The ZTE 40G QSFP+ module uses an MTP/MPO parallel optical connector. The correct MPO/MTP cable type and polarity must be selected according to the network topology and transceiver configuration.

Proper fiber polarity and lane mapping are important for establishing a 40GBASE-SR4 link. The optical interface uses multiple fiber lanes rather than a conventional duplex LC connection.

QSFP+ Form Factor

The QSFP+ form factor provides a compact, high-density interface for 40Gbps networking. It is designed for compatible switches, routers, servers, storage systems, network adapters, and other 40G networking equipment.

The module's pluggable design makes installation, replacement, maintenance, and network expansion straightforward on supported host platforms.

Digital Diagnostic Monitoring

The ZTE 033030600012 supports digital diagnostic functionality through an I2C management interface. Supported host equipment can use diagnostic information to monitor operating conditions and assist with network maintenance and troubleshooting. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

Compatibility

• Compatible ZTE 40G QSFP+ networking platforms
• Compatible ZTE switches and routers
• Compatible 40G QSFP+ Ethernet interfaces
• Compatible data center networking equipment
• Compatible telecom networking platforms
• Compatible OM3 multimode fiber infrastructure
• Compatible OM4 multimode fiber infrastructure

Actual compatibility depends on the host equipment model, firmware, supported optics list, transceiver coding, optical specifications, and platform requirements. Always verify compatibility before installation.

Benefits

• 40Gbps high-bandwidth optical connectivity
• 850nm short-reach optical technology
• Up to 300m over OM3 multimode fiber
• Up to 400m over OM4 multimode fiber
• Compact QSFP+ form factor
• High-density data center networking
• Low power consumption below 1.5W
• Digital diagnostics support
• Suitable for switch-to-switch links
• Suitable for HPC and storage networks

Why Buy from Datacom Technologies (BD)?

Datacom Technologies (BD) supplies ZTE networking and optical infrastructure products in Bangladesh, including ZTE QSFP+ transceivers, SFP/SFP+ modules, optical networking equipment, fiber-optic products, enterprise switches, telecom equipment, and data center connectivity solutions. Customers can receive competitive pricing, technical consultation, deployment assistance, and after-sales support.

• Call/WhatsApp: +8801748173213
• Email: sales@datacom.com.bd
• Alternative Email: datacomtechnologiesbd@gmail.com
• Office: Tropical Center, 218, Dr. Kudroti Khuda Road, New Elephant Road, Dhaka-1205, Bangladesh

Frequently Asked Questions (FAQ)

Q1: What is the ZTE 033030600012?
The ZTE 033030600012 is a 40Gbps QSFP+ 40GBASE-SR4 optical transceiver designed for short-reach multimode fiber networking.

Q2: What is the data rate?
The module supports an aggregate data rate of 40Gbps, with approximately 10.3125Gbps per optical channel.

Q3: What wavelength does the ZTE 40G QSFP+ use?
It uses 850nm VCSEL-based optical transmission.

Q4: What is the maximum distance?
The module supports up to 300 meters on OM3 multimode fiber and up to 400 meters on OM4 multimode fiber. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

Q5: What type of fiber does this module use?
It is designed for multimode fiber, including OM3 and OM4.

Q6: What connector does the ZTE 40G module use?
It uses an MTP/MPO parallel optical connector.

Q7: Is the ZTE 033030600012 suitable for data centers?
Yes. Its 40GBASE-SR4 architecture, compact QSFP+ form factor, and short-reach multimode support make it suitable for data center and high-performance networking applications.

Q8: Is the module hot-pluggable?
The QSFP+ form factor is designed for pluggable installation, and the module is specified for hot-swappable operation on compatible equipment. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

Q9: Does the module support digital diagnostics?
Yes. Digital diagnostic functionality is supported through the I2C management interface. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

Q10: What is the power consumption?
The module is specified with power consumption below 1.5W. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

Q11: What are the MPN references for this ZTE module?
The module is identified as ZTE 033030600012, with MPN references TR-QQ85X-N00 and EOLQ-8540G-03-MO. ([datacom.com.bd](https://www.datacom.com.bd/zte-sfp-module/zte-40g-850nm-mm-300m-qsfp-sfp-module))

Q12: Where can I buy the ZTE 40G 850nm MM 300m QSFP+ SFP Module in Bangladesh?
You can contact Datacom Technologies (BD) for ZTE 40G QSFP+ optical transceivers, SFP/SFP+ modules, fiber-optic networking products, data center equipment, and telecom connectivity solutions with competitive pricing and nationwide delivery.