Cisco C9300L-48T-4X-E Catalyst 9300L Switches
Cisco C9300L-48T-4X-E Catalyst 9300L Switch is an enterprise-grade Layer 3 access switch designed for secure and scalable campus networks. It features 48 × 1G RJ-45 ports with 4 × 10G SFP+ uplink ports, providing reliable high-speed connectivity for business infrastructure. Powered by Cisco IOS XE and StackWise-320 technology, it delivers advanced security, automation, and high-performance switching for modern enterprise networks.
Specification Table for the Cisco C9300L-48T-4X-E Catalyst 9300L Switch
| Specification | Details |
|---|
| Product Model | Cisco C9300L-48T-4X-E |
| Series | Cisco Catalyst 9300L Series |
| Switch Type | Layer 3 Managed Enterprise Switch |
| Downlink Ports | 48 × 10/100/1000 Gigabit Ethernet (RJ-45) |
| Uplink Ports | 4 × 10G SFP+ fixed uplink ports |
| PoE Support | No (Data-only model) |
| Switching Capacity | 176 Gbps |
| Switching Capacity (Stacked) | 496 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Forwarding Rate (Stacked) | 369.05 Mpps |
| Stacking Technology | Cisco StackWise-320 |
| Stacking Bandwidth | 320 Gbps |
| Maximum Stack Members | Up to 8 switches |
| MAC Address Table | 32,000 entries |
| IPv4 Routing Entries | 32,000 |
| IPv6 Routing Entries | 16,000 |
| Multicast Routes | 8,000 |
| VLAN IDs | Up to 4,094 |
| Switched Virtual Interfaces (SVIs) | Up to 1,000 |
| QoS Entries | 5,120 |
| ACL Entries | 5,120 |
| Packet Buffer | 16 MB |
| DRAM | 8 GB |
| Flash Memory | 16 GB |
| Jumbo Frame Support | Up to 9,198 bytes |
| Operating System | Cisco IOS XE |
| Management | CLI, SNMP, NETCONF, RESTCONF |
| Default Power Supply | 350W AC |
| Form Factor | 1U Rack-mount |
| Dimensions (H × W × D) | 1.73 × 17.5 × ~16.1 inches |
| Weight | ~7 kg |
Cisco C9300L-48T-4X-E Catalyst 9300L Switch - Full Description
The Cisco C9300L-48T-4X-E Catalyst 9300L Switch is an enterprise-grade Layer-3 managed access switch designed for high-performance campus and enterprise networks. It provides 48 × 10/100/1000 Gigabit Ethernet RJ45 ports and 4 × 10G SFP+ uplink ports, allowing reliable connectivity between access and aggregation layers.
Built on the Cisco Catalyst 9300L platform, the switch runs on Cisco IOS-XE with Network Essentials license, delivering advanced network automation, security, and programmability features. It supports technologies such as StackWise-320, enabling multiple switches to operate as a single logical unit with up to 320 Gbps stacking bandwidth for easier network management and scalability.
With 176 Gbps switching capacity and up to 130.95 Mpps forwarding rate, the C9300L-48T-4X-E is designed for demanding environments like enterprise campuses, branch offices, and data centers where high reliability, security, and performance are required.
Key Features
- 48 × 10/100/1000 Gigabit Ethernet RJ45 ports for high-density access connectivity.
- 4 × 10G SFP+ uplink ports for high-speed backbone connections.
- Layer 3 routing support including OSPF, EIGRP, RIP, and VRRP.
- StackWise-320 technology with up to 320 Gbps stacking bandwidth.
- Switching capacity up to 176 Gbps and forwarding rate 130.95 Mpps.
- Advanced security features such as MACsec, ACLs, and 802.1X authentication.
- Flexible NetFlow monitoring for network visibility and analytics.
- Cisco IOS-XE operating system with automation and programmability.
- Redundant power supply and fan support for enterprise reliability.
How to Install Cisco C9300L-48T-4X-E
1. Rack Mount Installation
- Attach the rack mounting brackets to the switch.
- Install the switch into a standard 19-inch network rack.
- Secure the device using rack screws.
2. Connect Power
- Insert the AC power supply cable (350W PSU) into the power port.
- Connect it to a stable power source or UPS.
3. Connect Network Devices
- Use Ethernet cables (Cat6/Cat6A) to connect devices to the 48 RJ45 ports.
- Insert SFP+ modules into the 10G uplink ports if fiber connectivity is required.
4. Console Setup
- Connect a console cable from PC to switch console port.
- Open terminal software like PuTTY or SecureCRT.
- Configure basic settings such as: Hostname, Management IP, VLAN configuration, Default gateway
Compatibility
Compatible Cisco Modules
- SFP+ 10G transceiver modules
- C9300L-STACK-KIT stacking module
- STACK-T3 stacking cables
Compatible Devices
- Cisco Catalyst 9300 / 9300L switches for stacking
- Cisco Catalyst 9400 and 9500 series core switches
- Enterprise routers, firewalls, and servers
Supported Software
- Cisco IOS-XE
- Cisco DNA Center for centralized network management and automation.
FAQ
1. How many ports are available on C9300L-48T-4X-E?
It has 48 Gigabit Ethernet RJ45 ports and 4 × 10G SFP+ uplink ports.
2. Does the switch support stacking?
Yes, it supports StackWise-320 technology for stacking multiple switches into a single logical unit.
3. Does the C9300L-48T-4X-E support PoE?
No, this model is a data-only switch and does not support PoE.
4. What operating system does the switch use?
It runs Cisco IOS-XE, which provides automation, programmability, and advanced network security features.
5. Where is this switch typically used?
It is widely used in enterprise campus networks, branch offices, and data centers where reliable high-speed connectivity is required.
What is the price of Cisco C9300L-48T-4X-E Catalyst 9300L Switches in Bangladesh?
The lowest price of Cisco C9300L-48T-4X-E Catalyst 9300L Switches in Bangladesh is 305,000৳. You can buy the Cisco C9300L-48T-4X-E at best price from our website or visit our Office.
For the most accurate pricing, stock availability, and warranty details, we recommend contacting us before placing your order.
-750x250.png "Datacom Technologies (BD)"){kind=logo}
