FINISAR FTLC9152RGPL2 100G QSFP28 Optical Transceiver Module

About FINISAR FTLC9152RGPL2 100G QSFP28 Optical Transceiver Module in Bangladesh

The FINISAR FTLC9152RGPL2 is a high-speed 100Gbps QSFP28 optical transceiver designed for 100G Ethernet connectivity over duplex multimode fiber. It uses four-channel coarse wavelength division multiplexing (SWDM4) technology, allowing multiple optical wavelengths to operate over duplex multimode fiber through a compact QSFP28 interface.

The FTLC9152RGPL family is designed around four 25Gbps optical channels and supports an aggregate bit rate of up to 103.1Gbps. The optical channels use wavelengths in the 850nm, 880nm, 910nm, and 940nm range, providing a flexible 100G solution for short-reach data center and enterprise networking applications. :contentReference[oaicite:0]{index=0}

Unlike conventional 100GBASE-SR4 modules that typically use parallel MPO/MTP fiber, the FTLC9152RGPL uses duplex multimode fiber with duplex LC receptacles. This makes the module particularly useful for installations where duplex LC multimode fiber infrastructure is already available. :contentReference[oaicite:1]{index=1}

The Finisar FTLC9152RGPL specification supports maximum link lengths of approximately 75m on OM3, 100m on OM4, and 150m on OM5 duplex multimode fiber. The exact supported distance should be determined from the fiber grade and complete optical channel characteristics. :contentReference[oaicite:2]{index=2}

FINISAR FTLC9152RGPL2 100G QSFP28 Specifications & Features

Overview

The FINISAR FTLC9152RGPL2 100G QSFP28 Optical Transceiver Module is designed to provide high-bandwidth 100G Ethernet connectivity using duplex multimode fiber. Its SWDM4 architecture uses four optical wavelengths instead of requiring four separate parallel fiber pairs, allowing 100G traffic to be transported over a conventional duplex multimode fiber connection.

The module's four optical channels operate at approximately 25Gbps each, producing an aggregate 103.1Gbps optical bit rate. The electrical host interface uses a 4 × 25G CAUI-4 architecture. :contentReference[oaicite:3]{index=3}

Its duplex LC interface differentiates this module from common 100GBASE-SR4 QSFP28 modules that use MPO/MTP connectors. This can simplify deployment in data centers and enterprise networks that already have duplex LC multimode fiber cabling.

Buy FINISAR FTLC9152RGPL2 100G QSFP28 Transceiver in Bangladesh

Purchase the FINISAR FTLC9152RGPL2 100G QSFP28 Optical Transceiver Module from Datacom Technologies (BD). We supply Finisar optical transceivers, QSFP28 modules, SFP/SFP+ optics, fiber-optic networking products, enterprise switches, data center equipment, and high-speed optical connectivity solutions with competitive pricing, technical consultation, deployment assistance, and nationwide delivery throughout Bangladesh.

Key Features

• 100Gbps-class Ethernet optical connectivity
• QSFP28 hot-pluggable form factor
• SWDM4 four-wavelength optical technology
• 850nm, 880nm, 910nm and 940nm optical wavelengths
• 4 × 25Gbps VCSEL-based optical transmission
• 4 × 25G CAUI-4 electrical interface
• Duplex multimode fiber support
• Duplex LC optical connectors
• Up to 75m over OM3 fiber
• Up to 100m over OM4 fiber
• Up to 150m over OM5 fiber
• 103.1Gbps aggregate bit rate
• Digital diagnostic monitoring through I2C
• Maximum power dissipation below 3.5W
• 0°C to 70°C commercial operating temperature

Applications

• 100G Data Center Networking
• Switch-to-Switch Connectivity
• Rack-to-Rack Connectivity
• Data Center Aggregation
• Enterprise Core Networking
• High-Speed Ethernet Backbones
• Server-to-Switch Connectivity
• Multimode Fiber Network Upgrades
• High-Density Network Infrastructure
• Short-Reach 100G Ethernet Links

SWDM4 Optical Technology

SWDM4, or Shortwave Wavelength Division Multiplexing using four wavelengths, allows multiple optical channels to be carried over duplex multimode fiber. The FTLC9152RGPL uses four optical wavelengths around 850nm, 880nm, 910nm and 940nm to transport the 100G Ethernet signal. :contentReference[oaicite:4]{index=4}

This architecture provides an alternative to parallel-fiber 100G solutions. Instead of requiring an MPO/MTP parallel fiber interface, the FTLC9152RGPL uses duplex LC connectors and duplex multimode fiber.

Duplex LC Multimode Fiber Connectivity

The FTLC9152RGPL is designed for duplex multimode fiber and uses duplex LC receptacles. This makes it suitable for data center environments where LC-based multimode fiber cabling is already installed.

The published specification gives maximum link lengths of approximately 75m on OM3, 100m on OM4 and 150m on OM5 duplex multimode fiber. Actual achievable distance depends on the complete optical channel, including fiber attenuation, connector loss, patching and optical budget. :contentReference[oaicite:5]{index=5}

QSFP28 Form Factor

The QSFP28 form factor provides a compact, high-density interface for 100Gbps networking. The FTLC9152RGPL2 can be installed in compatible QSFP28 ports on switches, routers, network adapters and other supported networking equipment.

The hot-pluggable design allows supported network operators to install, replace or upgrade optical modules without replacing the complete host networking platform. Actual hot-plug operation depends on the host equipment.

Digital Diagnostic Monitoring

The FTLC9152RGPL provides digital diagnostic functions through its I2C management interface. Supported host platforms can use the management interface to access module operating information and assist with optical network monitoring and troubleshooting. :contentReference[oaicite:6]{index=6}

Power and Operating Conditions

The module operates from a single 3.3V power supply and has a maximum power dissipation below 3.5W. The published commercial case operating temperature range is 0°C to 70°C. :contentReference[oaicite:7]{index=7}

Compatibility

• Compatible 100G QSFP28 switches
• Compatible 100G QSFP28 routers
• Compatible data center networking platforms
• Compatible enterprise network equipment
• Compatible network adapters with supported QSFP28 ports
• Compatible duplex multimode fiber infrastructure

Actual compatibility depends on the exact host equipment, firmware, supported transceiver list, optical coding, QSFP28 implementation and platform requirements. Always verify the host device before purchasing.

Benefits

• High-bandwidth 100G Ethernet connectivity
• Uses existing duplex multimode fiber architecture
• Duplex LC connector instead of MPO/MTP
• Four-wavelength SWDM4 technology
• Compact QSFP28 form factor
• Supports OM3, OM4 and OM5 multimode fiber
• Up to 150m on OM5 fiber
• Digital diagnostic monitoring
• Low power consumption below 3.5W
• Suitable for high-density data center networking

Why Buy from Datacom Technologies (BD)?

Datacom Technologies (BD) supplies networking and data center infrastructure products in Bangladesh, including Finisar optical transceivers, QSFP28 modules, SFP/SFP+ optics, fiber-optic equipment, enterprise switches, server networking components, and high-speed data center connectivity solutions. Customers can receive competitive pricing, technical consultation, deployment assistance, and after-sales support.

• Call/WhatsApp: +8801748173213
• Email: sales@datacom.com.bd
• Alternative Email: datacomtechnologiesbd@gmail.com
• Office: Tropical Center, 218, Dr. Kudroti Khuda Road, New Elephant Road, Dhaka-1205, Bangladesh

Frequently Asked Questions (FAQ)

Q1: What is the FINISAR FTLC9152RGPL2?
The FTLC9152RGPL2 is a 100Gbps QSFP28 optical transceiver designed for 100G Ethernet over duplex multimode fiber using SWDM4 technology.

Q2: What is the data rate?
The module supports an aggregate bit rate of up to 103.1Gbps for 100G Ethernet applications.

Q3: What wavelengths does the FTLC9152RGPL use?
The SWDM4 architecture uses four wavelengths around 850nm, 880nm, 910nm and 940nm. :contentReference[oaicite:8]{index=8}

Q4: What type of fiber does it use?
The module is designed for duplex multimode fiber (MMF).

Q5: What connector does the FTLC9152RGPL2 use?
It uses duplex LC optical receptacles.

Q6: What is the maximum transmission distance?
The published FTLC9152RGPL specification supports approximately 75m on OM3, 100m on OM4 and 150m on OM5 duplex multimode fiber. :contentReference[oaicite:9]{index=9}

Q7: Is this the same as a 100GBASE-SR4 module?
No. The FTLC9152RGPL uses SWDM4 technology over duplex multimode fiber and duplex LC connectors, whereas conventional 100GBASE-SR4 modules generally use parallel multimode fiber and MPO/MTP connectivity.

Q8: Does the FTLC9152RGPL2 support DDM?
Yes. Digital diagnostic functions are available through the I2C management interface. :contentReference[oaicite:10]{index=10}

Q9: What is the power consumption?
The published specification lists maximum module power dissipation below 3.5W. :contentReference[oaicite:11]{index=11}

Q10: What is the operating temperature?
The commercial case operating temperature range is 0°C to 70°C. :contentReference[oaicite:12]{index=12}

Q11: Is the FTLC9152RGPL2 suitable for data centers?
Yes. Its 100G bandwidth, compact QSFP28 form factor, duplex LC interface and multimode SWDM4 architecture make it suitable for short-reach data center networking applications.

Q12: Where can I buy the FINISAR FTLC9152RGPL2 in Bangladesh?
You can contact Datacom Technologies (BD) for Finisar 100G QSFP28 optical transceivers, SWDM4 modules, fiber-optic networking products, data center equipment and high-speed optical connectivity solutions with competitive pricing and nationwide delivery.