Nokia 100G 10km Optical Transceiver LR4 (1AB426470001)

About Nokia 1AB426470001 100GBASE-LR4 CFP2 10km Optical Transceiver in Bangladesh

The Nokia 1AB426470001 is a 100G optical transceiver designed for high-speed single-mode fiber networking applications. Using the CFP2 form factor and 100GBASE-LR4 optical standard, the module supports optical links of up to 10km over duplex single-mode fiber.

The 1AB426470001 operates using four wavelength-division-multiplexed optical lanes around the 1310nm wavelength band. It uses a duplex LC connector and supports applications including 100G Ethernet and OTU4. Technical references specify a minimum optical budget of 6.3dB and support for DDM/DOM optical diagnostics. :contentReference[oaicite:2]{index=2}

Nokia 1AB426470001 100G LR4 Optical Transceiver Specifications & Features

Overview

The Nokia 1AB426470001 is a high-speed 100G CFP2 optical transceiver intended for long-reach single-mode fiber networking. Its 100GBASE-LR4 architecture uses four wavelength-multiplexed optical channels around 1310nm to provide high-bandwidth connectivity over distances of up to 10km.

The module is suitable for compatible Nokia networking platforms and can be used in applications such as ISP aggregation and backbone networks, mobile operator infrastructure, data-center interconnections and other 100G optical links. :contentReference[oaicite:3]{index=3}

Buy Nokia 1AB426470001 100G LR4 Transceiver in Bangladesh

Purchase the Nokia 1AB426470001 100GBASE-LR4 CFP2 10km Optical Transceiver from Datacom Technologies (BD). We supply Nokia optical networking equipment, 100G transceivers, fiber-optic modules, data-center networking hardware and telecom infrastructure components in Bangladesh with competitive pricing and technical support.

Key Features

• 100GBASE-LR4 optical connectivity
• CFP2 form factor
• Up to 10km transmission distance
• Single-Mode Fiber (SMF) support
• Duplex LC connector
• 1310nm wavelength band
• Four WDM optical lanes
• Minimum 6.3dB optical budget
• EML laser transmitter
• PIN photodiode receiver
• DDM/DOM optical diagnostics
• 0°C to 70°C operating temperature
• Supports 100G Ethernet and OTU4

100GBASE-LR4 Optical Standard

The Nokia 1AB426470001 supports the 100GBASE-LR4 optical standard for high-bandwidth Ethernet networking. LR4 is designed for long-reach 100G connectivity over single-mode fiber.

The module uses four WDM-separated optical lanes in the 1310nm wavelength region. The individual optical channels are multiplexed onto a duplex single-mode fiber connection through the LC interface. :contentReference[oaicite:4]{index=4}

10km Transmission Distance

The 1AB426470001 is specified for a maximum transmission distance of 10km over compatible single-mode fiber.

The actual achievable distance depends on fiber attenuation, connector losses, splice losses, optical budget, environmental conditions and the characteristics of the equipment at both ends of the link.

CFP2 Form Factor

The Nokia 1AB426470001 uses the CFP2 optical transceiver form factor. CFP2 was designed for high-speed optical networking applications including 100G Ethernet and telecom transport.

Before ordering, verify that the target Nokia equipment specifically supports CFP2 modules. The 1AB426470001 should not be substituted directly with a QSFP28 module simply because both may support 100G networking.

Duplex LC Connector

The transceiver uses a duplex LC optical connector for transmitting and receiving signals over separate fibers.

A compatible duplex LC single-mode fiber patch cable is required to establish the optical connection between the transceiver and the remote optical device.

Single-Mode Fiber Support

The 1AB426470001 is designed for Single-Mode Fiber (SMF). SMF provides the optical characteristics required for long-distance 100G LR4 links.

For a 10km deployment, use suitable single-mode fiber infrastructure and ensure that the complete optical link remains within the module's supported optical budget.

1310nm Wavelength

The Nokia 1AB426470001 operates in the 1310nm wavelength region using four WDM-separated optical lanes. The documented wavelength channels span approximately 1294.53nm to 1310.19nm. :contentReference[oaicite:5]{index=5}

This wavelength region is commonly used for long-reach single-mode fiber networking because of its favorable transmission characteristics over metropolitan and data-center interconnection distances.

Optical Budget

The module has a documented minimum guaranteed optical budget of 6.3dB. :contentReference[oaicite:6]{index=6}

The optical budget represents the available loss margin between transmitter output and receiver sensitivity. Actual link engineering should account for fiber attenuation, connectors, splices and other passive optical components.

DDM / DOM Monitoring

The Nokia 1AB426470001 supports DDM/DOM optical diagnostics. This capability can provide operational information such as module temperature, supply voltage, laser bias and optical transmit/receive power when supported by the host networking equipment.

Digital diagnostics can simplify optical-link troubleshooting and help network administrators monitor transceiver operating conditions. :contentReference[oaicite:7]{index=7}

100G Ethernet and OTU4

The 1AB426470001 supports applications including 100G Ethernet at approximately 103.125Gbps and OTU4 at approximately 112Gbps. :contentReference[oaicite:8]{index=8}

This makes the module suitable for both high-speed Ethernet networking and compatible optical transport applications.

Telecom and Data Center Applications

The Nokia 1AB426470001 can be used in high-bandwidth optical networking environments such as:

• ISP backbone networks
• ISP aggregation networks
• Mobile operator core networks
• Mobile backhaul infrastructure
• Data-center interconnects
• Enterprise backbone networks
• High-speed router interconnections
• High-capacity optical links
• 100G Ethernet networks
• OTU4 transport applications

Enterprise and Data Center Interconnect

The 10km reach of the 1AB426470001 makes it useful when network equipment must be interconnected across buildings, campuses, metropolitan facilities or other locations where short-reach multimode optics are insufficient.

For data-center interconnect applications, the module provides high-bandwidth optical connectivity while retaining the flexibility of single-mode fiber infrastructure.

Compatibility Considerations

The most important compatibility requirement is the CFP2 host interface. The target Nokia equipment must support the 1AB426470001 or an officially compatible CFP2 100GBASE-LR4 optical module.

• Compatible Nokia CFP2 port
• 100G optical interface support
• 100GBASE-LR4 support
• Duplex LC optical connection
• Single-mode fiber infrastructure
• Compatible 1310nm LR4 optics
• Appropriate firmware and transceiver support

Always verify the exact Nokia platform and software/firmware requirements before installation.

Nokia 1AB426470001 vs QSFP28 100G LR4

Note: The optical standard may be similar, but CFP2 and QSFP28 are different physical/electrical module formats and are not interchangeable without appropriate host support.

Benefits

• 100Gbps-class optical networking
• Up to 10km reach over SMF
• 100GBASE-LR4 support
• CFP2 high-speed form factor
• Duplex LC connectivity
• 1310nm four-lane WDM architecture
• DDM/DOM monitoring
• Suitable for telecom and data-center applications
• Supports 100G Ethernet and OTU4
• Suitable for compatible Nokia networking platforms

Why Buy from Datacom Technologies (BD)?

Datacom Technologies (BD) supplies Nokia optical networking equipment, 100G transceivers, fiber-optic modules, data-center networking hardware and telecom infrastructure components in Bangladesh. Customers can receive competitive pricing, technical consultation, compatibility assistance and nationwide delivery.

• Call/WhatsApp: +8801748173213
• Email: sales@datacom.com.bd
• Alternative Email: datacomtechnologiesbd@gmail.com
• Office: Tropical Center, 218, Dr. Kudroti Khuda Road, New Elephant Road, Dhaka-1205, Bangladesh

Frequently Asked Questions (FAQ)

Q1: What is Nokia 1AB426470001?
The Nokia 1AB426470001 is a CFP2 100GBASE-LR4 optical transceiver designed for high-speed single-mode fiber networking.

Q2: What is the maximum transmission distance?
The module is specified for up to 10km over compatible single-mode fiber.

Q3: What form factor does 1AB426470001 use?
It uses the CFP2 form factor.

Q4: Is 1AB426470001 a QSFP28 module?
No. The documented Nokia 1AB426470001 is a CFP2 module. Some third-party listings incorrectly describe it as QSFP28, so the host equipment should be checked carefully before ordering. :contentReference[oaicite:9]{index=9}

Q5: What optical standard does it support?
It supports 100GBASE-LR4.

Q6: What fiber type does it use?
It is designed for Single-Mode Fiber (SMF).

Q7: What connector does it use?
The module uses a duplex LC connector.

Q8: What wavelength does it use?
It uses four WDM-separated optical lanes in the 1310nm wavelength region.

Q9: Does 1AB426470001 support DDM/DOM?
Yes. The documented module supports digital diagnostic monitoring. :contentReference[oaicite:10]{index=10}

Q10: What is the optical budget?
The minimum guaranteed optical budget is documented as 6.3dB.

Q11: What applications are supported?
Supported applications include 100G Ethernet and OTU4, along with telecom, mobile backhaul and data-center interconnection applications.

Q12: What temperature range does it support?
The documented operating temperature range is 0°C to 70°C.

Q13: Can it be used with any 100G switch?
No. The switch, router or optical platform must specifically support the CFP2 form factor and the relevant 100GBASE-LR4 module.

Q14: Is it suitable for a 10km data-center interconnect?
Yes, provided the complete optical link uses compatible single-mode fiber and remains within the module's optical budget.

Q15: Where can I buy Nokia 1AB426470001 in Bangladesh?
You can contact Datacom Technologies (BD) for Nokia optical transceivers, 100G networking equipment, fiber-optic modules and telecom infrastructure hardware with competitive pricing and technical support.