INTEL FTLX8574D3BCV SFP+ Transceiver Module

Intel FTLX8574D3BCV SFP+ Transceiver Module Specifications

What Is Intel FTLX8574D3BCV Used For?

The Intel FTLX8574D3BCV is used to establish high-speed optical Ethernet connections between compatible network devices. Its dual-rate capability allows it to operate at both 1 Gigabit and 10 Gigabit Ethernet speeds, depending on the capabilities of the host platform and network configuration.

It is particularly useful in enterprise networks, data centers, campus networks, server rooms, and other environments where multimode fiber is used for short- to medium-distance network connections.

The transceiver can be installed in compatible SFP+ ports on network switches, network interface cards, servers, and other networking equipment that supports the module's optical specifications.

How Does Intel FTLX8574D3BCV Work?

The FTLX8574D3BCV converts electrical Ethernet signals from a compatible host device into optical signals for transmission over multimode fiber. At the receiving end, the module converts incoming optical signals back into electrical data for processing by the connected network equipment.

The module operates at an 850nm wavelength and uses a VCSEL laser for transmission. A PIN receiver detects the incoming optical signal. With a duplex LC connector, separate optical paths are used for transmitting and receiving data.

For 10 Gigabit Ethernet operation, the module supports 10GBASE-SR/SW connectivity. For Gigabit Ethernet applications, it supports 1000BASE-SX when used with a compatible 1G/10G SFP+ platform.

Intel FTLX8574D3BCV 1G/10G Dual-Rate Support

One of the major advantages of the FTLX8574D3BCV is its dual-rate operation.

The module supports:

• 1.25Gbps operation for compatible 1000BASE-SX applications
• 9.95 to 10.3Gbps operation for compatible 10G Ethernet applications

This makes the transceiver useful for network environments that require flexible 1G and 10G optical connectivity.

However, compatibility is important. The FTLX8574D3BCV is designed for systems specifically supporting 10G SFP+ or 1G/10G SFP+ operation and should not be treated as a universal module for native 1G-only SFP ports. Always verify the host device's supported transceiver list before installation.

Intel FTLX8574D3BCV Fiber Type and Transmission Distance

The FTLX8574D3BCV is designed for multimode fiber (MMF) networking and operates at an 850nm wavelength.

At 10Gbps, the maximum supported distance can reach 400 meters over OM4 multimode fiber. The actual transmission distance depends on the fiber type, installed cabling, optical budget, network equipment, and operating data rate.

Different multimode fiber grades can provide different maximum distances. Therefore, customers should select the fiber type according to the required network distance and application.

Intel FTLX8574D3BCV Connector and Fiber Compatibility

The module uses a duplex LC optical connector. It is intended for multimode fiber connections using compatible LC-LC duplex fiber cables.

This makes it suitable for common enterprise and data center fiber infrastructure where LC duplex multimode cabling is already installed.

Before purchasing, confirm:

• Host device supports SFP+
• Host device supports 1G/10G operation if dual-rate functionality is required
• The network equipment accepts the required transceiver
• Multimode fiber is available
• Duplex LC cabling is compatible
• Required transmission distance is within the optical specifications

Intel FTLX8574D3BCV Digital Diagnostic Monitoring

The FTLX8574D3BCV supports digital diagnostic functions through a 2-wire serial interface. Digital diagnostics can provide useful information about optical operating parameters and help network administrators monitor transceiver performance.

This feature can be useful when troubleshooting fiber links or monitoring optical transceiver conditions in enterprise and data center environments.

Benefits of Intel FTLX8574D3BCV

Dual-Rate 1G and 10G Connectivity

The FTLX8574D3BCV supports both 1Gbps and 10Gbps operation on compatible platforms, providing flexibility for networks with different bandwidth requirements.

Multimode Fiber Support

Its 850nm optical design makes the module suitable for multimode fiber installations commonly found in enterprise networks and data centers.

10GBASE-SR Connectivity

For compatible 10GbE SFP+ systems, the transceiver provides 10GBASE-SR/SW optical connectivity for high-speed short- and medium-distance network links.

Long Multimode Fiber Reach

When used with OM4 multimode fiber, the module can support distances of up to 400 meters at 10Gbps under specified conditions.

Hot-Pluggable Design

The SFP+ form factor allows the module to be installed or replaced without requiring a complete network device replacement, subject to the host platform's installation procedures.

Digital Diagnostics

Built-in digital diagnostic functionality helps network administrators monitor supported optical parameters and troubleshoot connectivity issues.

Intel FTLX8574D3BCV for Enterprise Networking

Modern enterprise networks often need a combination of Gigabit and 10 Gigabit connectivity. The Intel FTLX8574D3BCV provides a flexible optical solution for compatible SFP+ infrastructure where multimode fiber is preferred.

It can be used for switch-to-switch connections, server-to-switch links, network uplinks, data center interconnects, and other short- to medium-distance optical Ethernet applications.

For example, a compatible 10GbE network interface card can be connected to a compatible 10G SFP+ switch using two suitable optical transceivers and a duplex multimode LC fiber cable.

Intel FTLX8574D3BCV Compatibility

Compatibility should be checked before purchasing because SFP+ transceiver support can vary between switches, network interface cards, servers, and other host platforms.

The FTLX8574D3BCV is intended for equipment designed to support 10G SFP+ or 1G/10G SFP+ operation. The manufacturer specifically notes that it is not intended for native 1G-only SFP ports.

For the best result, verify the exact host device model and its supported transceiver list before ordering.

Intel FTLX8574D3BCV Applications

The transceiver can be suitable for a variety of networking environments, including:

• Enterprise Ethernet networks
• Data center networks
• Campus networks
• Server rooms
• Switch-to-switch connectivity
• 10GbE server connectivity
• Network uplinks
• Multimode fiber infrastructure
• Storage and data networking environments
• High-speed LAN connectivity

Why Choose Intel FTLX8574D3BCV?

The FTLX8574D3BCV is a practical option for organizations that need 1G/10G optical connectivity over multimode fiber. Its SFP+ form factor, 850nm VCSEL transmitter, duplex LC connector, digital diagnostics, and support for 10GBASE-SR/SW make it suitable for compatible enterprise and data center networking equipment.

Its dual-rate capability can also provide additional flexibility when upgrading a network from Gigabit Ethernet toward 10 Gigabit Ethernet, provided the host equipment supports the required operating modes.

Buy Intel FTLX8574D3BCV in Bangladesh

Looking for the Intel FTLX8574D3BCV SFP+ Transceiver Module in Bangladesh? Datacom Technologies BD provides enterprise networking and data center hardware for businesses, IT professionals, system integrators, and organizations across Bangladesh.

We can assist with sourcing networking products such as:

• SFP and SFP+ transceiver modules
• 10 Gigabit Ethernet optical modules
• Network interface cards
• Enterprise switches
• Cisco networking hardware
• Intel networking products
• Server and storage hardware
• Fiber networking accessories

Before ordering, provide your exact switch, server, or network adapter model so that transceiver compatibility can be checked according to the required interface, speed, fiber type, and network distance.

Why Choose Datacom Technologies BD?

Datacom Technologies BD specializes in enterprise networking, server, storage, and IT infrastructure products in Bangladesh. We help customers select suitable hardware based on their actual network requirements instead of choosing products based only on model numbers.

Whether you need an SFP+ transceiver for a new 10GbE deployment, network expansion, server connectivity, or replacement, our team can assist with product availability and compatibility information.

Frequently Asked Questions

What is Intel FTLX8574D3BCV?

Intel FTLX8574D3BCV is a 1G/10G dual-rate SFP+ optical transceiver designed for Ethernet connectivity over multimode fiber. It supports 1000BASE-SX and 10GBASE-SR/SW applications on compatible platforms.

Is FTLX8574D3BCV a 10G SFP+ transceiver?

Yes. It is an SFP+ transceiver designed for 10 Gigabit Ethernet applications and also supports 1Gbps operation on compatible 1G/10G SFP+ platforms.

What wavelength does FTLX8574D3BCV use?

The FTLX8574D3BCV operates at an 850nm optical wavelength.

What fiber does FTLX8574D3BCV support?

The module is designed for multimode fiber (MMF) and uses a duplex LC connector.

What is the maximum distance of FTLX8574D3BCV?

The module supports up to 400 meters over OM4 multimode fiber at 10Gbps, subject to the specified optical conditions and compatible network equipment.

Does FTLX8574D3BCV support 1Gbps?

Yes. It supports 1.25Gbps operation for compatible 1000BASE-SX applications. However, the host platform must support the module's 1G/10G SFP+ operating configuration.

Does FTLX8574D3BCV support 10GBASE-SR?

Yes. FTLX8574D3BCV is designed for 10GBASE-SR/SW Ethernet applications over multimode fiber.

Can FTLX8574D3BCV work in a native 1G SFP port?

Not as a general assumption. The manufacturer specifies that this module is intended for systems designed for 10G SFP+ ports and 1G/10G SFP+ ports rather than native 1G-only SFP ports. Host-device compatibility should therefore be confirmed before purchase.

What connector does FTLX8574D3BCV use?

The FTLX8574D3BCV uses a duplex LC connector for multimode fiber connectivity.

Where can I buy Intel FTLX8574D3BCV in Bangladesh?

You can contact Datacom Technologies BD for Intel FTLX8574D3BCV availability, pricing, sourcing, and compatibility assistance in Bangladesh.